Welcome, Visitor
  
 
  |    |  
Search:   Search
Shop by Brand
AEA Technology
Alinco
Ameritron
Amphenol
ASA
Belden
Bose
CCrane
Cobra
Comet
Cushcraft
Daiwa
David Clark
Elecraft
Garmin
Grundig
Hy-Gain
Kantronics
Kenwood
LDG Electronics
Lido Mount
Lightspeed
Maldol
MFJ
Mirage
Otto
Prostar
Radiohaus
RF Industries
RM Italy
Sangean
Shakespeare
Sony
Tarheel
Uniden
Wouxun

IC-7200 HF/50MHz Transceiver

Icom

PRICE ON REQUEST
Availability: IN STOCK
Indicar produto
Dúvidas?
Aumentar fonte Diminuir fonte

IF DSP

The latest IF DSP technology is employed in the IC-7200. While the IC-7200 is an entry-class transceiver, advanced digital features are comparable to higher class transceivers.

AGC loop management

Distortion and blocking from strong nearby signals are prevented by placing DSP functions inside the AGC loop. The AGC time constants are selectable from fast, slow and off for each operating mode.

Digital IF filter

passband width rangeOptional filters will never be required for the IC-7200. The built-in digital filter allows you to flexibly select the filter width and shape from soft and sharp* and provides cutting-edge filter characteristics.
*Filter shape is selectable for SSB and CW modes only.

Manual notch filter

The manual notch filter delivers more than 70dB of attenuation. Strong interring tones will be eliminated without adversely affecting the AGC loop performance. ON the bottom right of the front panel, a dedicated control knob adjusts the notch filter frequency.

Digital Twin PBT

Only Icom brings you twin passband tuning! Tailor your IF passband with the Twin PBT by electronically shifting the upper and lower edges of the IF filter. Depending on the use of the concentric knobs, you can either narrow the IF passband, or shift the entire passband to eliminate interfering signals.

Digital noise reduction

The digital noise reduction reduces background noise and improves the signal-to-noise ratio. The noise reduction level is adjustable in 16 steps. It improves the readability of voice and data signals.

Digital noise blanker

The noise blanker reduces pulse-type noise such as engine ignition and sparking. The NB level and width (blanking duration) are adjustable in 100 steps.

High stability transmitter

The DDA (Direct Digital Synthesizer) creates a clear, clean transmit signal and improves the C/N ratio. With a dual-fan cooling system, the IC-7200 provides stable high quality output even during high duty cycle operation.

USB port for PC control

The IC-7200 can be controlled by a PC through a USB port using the CI-V data format. In addition, modulator and received audio can also be transferred over the USB cable. By using appropriate external software, you can record incoming calls and/or transmit preprogrammed messages from your PC.

Download the USB Driver

RF speech compressor

The digital RF speech compressor increases your average talk power in SSB mode. Even when the compression level is increased, the DSP controlled RF speech compressor provides low distortion audio.

CW mode operation

Full break-in, selectable CW carrier point (USB or LSB) and adjustable CW pitch are also standard.

Tough construction against water intrusion*

Waterproof protection technologies that are used in Icom's marine radios are applied to the buttons and knobs on the front panel to provide a measure of protection against water intrusion.
*IC-7200 is not waterproof.

Rugged design for outdoor use

The rugged design of the IC-7200 means your enjoyment of this rig is not limited to your shack only.

"Rear bumper"

The "rear bumper" protects various connectors on the rear panel and lets you stand the radio on its rear end when the antenna is disconnected, such as while moving or packing the radio.

Other Features

  • RIT
  • VOX
  • 0.5ppm frequency stability
  • LCD backlight (Hi/Lo/Off)
  • CI-V interface
  • 201 memory channels
  • Built-in 20dB attenuator
  • Preamplifier
  • Dial lock
  • Auto TS function
  • 1Hz step tuning
  • Band stacking register
  • Built-in voice synthesizer
  • Quick split
  • Front facing speaker
  • Quick set mode

General

Frequency coverage*1
U.S.A. Version
RX
TX



0.030– 60.000 MHz*2
1.800– 1.999 MHz
3.500– 3.999 MHz
5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz*3
7.000– 7.300 MHz
10.100–10.150 MHz
14.000– 14.350 MHz
18.068–18.168 MHz
21.000– 21.450 MHz
24.890–24.990 MHz
28.000– 29.700 MHz
50.000–54.000 MHz
*1 Frequency ranges vary depending on version.
*2 Guaranteed range: 0.5–29.7 and 50–54.000 MHz..
*3 USB only
Mode USB, LSB, CW, RTTY (FSK), AM
Number of channels 201 Ch. (199 regular, 2 scan edges)
Antenna connector SO-239 (50Ω)
Power supply requirement: 13.8V DC 15% (negative ground)
Operating Temperature range -10C to +60C; +14F to +140F
Frequency stability

Less than 0.5ppm

Frequency resolution 1Hz
Power consumption Tx Max. power: 22.0A
Max. audio: 2.0A
Rx Stand-by: 1.3A
Dimensions
(projections not included)
241 (W) 84 (H) 281 (D) mm;
912x 3516x 11116in.
Weight (approx.) 5.5kg; 12.1 lb

Transmitter

Output power
SSB, CW, RTTY
AM

2–100W
1-25W*
*Carrier power.
Modulation system
SSB
AM

Digital PSN modulation
Digital low power modulation
Spurious emission
(unwanted emission)
Less than -50dB (HF bands)
Less than -63dB (50 MHz band)
Carrier suppression More than 50dB
Unwanted sideband More than 50dB
Microphone connector 8-pin connector (600Ω)

Receiver

Receive system Triple conversion super-heterodyne
Intermediate frequencies
64.455 MHz
455 MHz
15.625 kHz
Sensitivity (10dB S/N, Preamp ON, Filter shape sharp)
SSB, CW

AM

Less than 0.16V (1.8-29.7 MHz)
Less than 0.13V (50 MHz band)

Less than 13V (0.5-1.799 MHz)
Less than 2V (1.8-29.7 MHz)
Less than 1V (50 MHz band)
Squelch sensitivity (Pre-amp: ON)
SSB, Threshold

Less than 5.6μV
Selectivity
SSB (BW: 2.4kHz sharp)

CW (BW: 500Hz sharp)

RTTY (BW: 350kHz)

AM (BW: 6kHz)

More than 2.4 kHz/–6dB
Less than 3.6 kHz/–60dB
More than 500 Hz/–6dB
Less than 900 Hz/–60dB
More than 360 Hz/–6dB
Less than 650 Hz/–60dB
More than 6.0 kHz/–6dB
Less than 15.0 kHz/–60dB
Spurious and image rejection ratio More than 70dB (except 1/2 IF through on 50 MHz band)
Audio output power (at 13.8V DC) More than 2.0W at 10% distortion with an 8Ω load
RIT variable range 9.999 kHz
EXT SP connector 2-connector 3.5 (d) mm (18″)/8Ω
Institutional
Questions and information
Shopping
Customer service
Sales, questions and information: sales@radiohausamerica.com
Payment methods
© 2017 Radiohaus America
| | |